MDD093B-N-030-N2M-110GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911262745
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
1 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110GA1 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 14.5 Nm and a nominal speed of 3000 min⁻¹. This motor comes with a plain shaft, shaft seal, and an integrated multiturn absolute encoder, along with a holding brake providing 11 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series and supplied for use with digital drive controllers. It converts drive current into controlled rotary motion for positioning tables, pick-and-place heads, and other automated axes that require accurate speed and angle control. With the B length code and 093 frame size, the unit fits a middle torque range while staying compact. That balance suits machines that need solid continuous output without requiring a larger mechanical envelope.
Its nominal speed reaches 3000 rpm, giving the drive a broad operating range for fast positioning and repeatable cycle control. At standstill, the winding can supply 14.5 Nm of continuous torque, which supports static loading and slow indexing without excessive thermal stress. An integrated blocking brake adds 11 Nm of holding torque so vertical or suspended loads can remain secured after power is removed. Rotor position is monitored by an integrated multi-turn absolute encoder, and the signal is transmitted through digital servo feedback for closed-loop regulation. The standard housing uses natural convection for cooling, which helps keep the motor layout simple where separate airflow hardware is not preferred.
The centering pilot measures 110 mm for accurate flange alignment, and the cable outlet is on Side A so all wiring stays on one side of the installation. A keyed Connector joins the power and feedback lines, helping the cable set seat securely during operation. A durable shaft seal protects the bearings from dust or coolant, while the plain shaft is supplied in standard form without a second shaft end on side B. This shaft arrangement supports direct coupling to common transmission elements such as pulleys, couplings, or gear units.
Frequently Asked Questions about MDD093B-N-030-N2M-110GA1:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2M-110GA1?
A: This model delivers 14.5 Nm of continuous torque at standstill.
Q: What centering diameter is provided for the MDD093B-N-030-N2M-110GA1 motor?
A: The centering diameter of this motor is 110 mm.
Q: Does the MDD093B-N-030-N2M-110GA1 include a holding brake, and what is its torque?
A: A blocking brake is included, offering 11 Nm of holding brake torque.
Q: What type of shaft and shaft seal does the MDD093B-N-030-N2M-110GA1 motor have?
A: The MDD093B-N-030-N2M-110GA1 features a plain shaft with a shaft seal for additional protection.
Q: What kind of encoder is installed on the MDD093B-N-030-N2M-110GA1 motor?
A: This motor is equipped with an integrated multiturn absolute encoder.
