Product Description:

The MDD093B-N-030-N2L-130PR2 is an AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion for positioning tasks, packaging axes, and material-handling equipment. Its frame uses size 093, with housing and rotating components balanced to the standard grade so vibration remains low during high-speed duty cycles.

This model can deliver a continuous standstill torque of 14.5 Nm, allowing the drive to hold or slowly move a load without overheating. Under rated excitation, it reaches a nominal speed of 3000 rpm, matching fast indexing requirements in multi-axis assemblies. Mounting accuracy is assisted by a centering diameter of 130 mm; this machined pilot keeps the stator concentric with the coupled machine shaft. Power and feedback conductors exit on the right side through a sealed connector, simplifying cabinet layouts that route cables from one direction. Digital feedback is provided by a digital servo feedback encoder, so the control loop receives high-resolution position data in real time. The rotor-stator set uses motor length code B to provide the needed electromagnetic cross-section while keeping overall mass manageable.

The motor is delivered with a blocking brake that supplies 22 Nm of holding torque, preventing vertical or suspended loads from drifting when drive power is removed. A factory-installed shaft seal protects the internal bearings against coolant splash and airborne dust. The output shaft is finished with a keyway, enabling positive torque transmission to couplings or pulleys without relying solely on clamping friction. The design uses a standard single-ended shaft configuration, omitting a side B extension to minimize footprint inside crowded mechanical assemblies.