Product Description:

The MDD093B-N-030-N2L-130PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into regulated mechanical motion for positioning tasks on automated machinery. The unit belongs to size 093 and length code B, uses a standard housing, and is delivered with a single shaft end, making it a compact drive element for axes that do not require a second output.

During continuous standstill, the motor delivers 14.5 Nm of torque, allowing it to support load without rotor movement while remaining within thermal limits. Its rated operating speed is 3000 rpm, matching drive stages that supply the corresponding electrical frequency for synchronized rotation. A centering diameter of 130 mm provides the registration surface that positions the housing precisely against mounting faces. Position feedback is generated through digital servo feedback, allowing the controller to close position, speed, and torque loops at high resolution. Power and signal lines exit on the right side because the connection hardware is located on that flank, and this right-side orientation supports cable routing when the machine layout favors that direction. The interface itself is a circular connector that supports secure connection without disturbing conduit routing.

The rotor uses standard balancing, which helps keep vibration levels suitable for typical machine speeds. A keyway shaft transmits torque to couplings or pulleys without relying only on friction, and a shaft seal helps reduce contaminant ingress along the output spindle. The motor is supplied without a blocking brake, so any mechanical holding function must be provided externally. The power interface uses a connector, and the motor has no side B shaft, which suits single-ended drive trains.