Product Description:

The MDD093B-N-030-N2L-130PL2 is a servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for direct connection to digital drive controllers, the unit converts electrical energy into controlled mechanical rotation so positioning tables, gantry axes, and tooling spindles can follow programmed motion profiles in industrial automation lines. Its size 093 frame and B length code give it a medium-power envelope suited to machines where footprint and inertia must be balanced against continuous torque demand.

At standstill, the motor delivers 14.5 Nm of continuous torque, enough to support static loads without overheating. The rotor reaches a nominal speed of 3000 rpm, matching typical inverter frequencies for coordinated motion. An internal blocking brake supplies 22 Nm of holding torque, securing the shaft when power is off. Mounting is simplified by a 130 mm centering diameter that keeps the housing concentric with coupled mechanics. Power and feedback conductors exit through a sealed connector on the left side, reducing cable stress inside compact cabinets.

Standard dynamic balancing minimizes vibration during high-speed cycles, and the housing uses the standard enclosure profile for this motor line. Encoder information is returned through digital servo feedback (DSF), enabling the controller to close high-resolution position loops without external sensors. The shaft is protected by a shaft seal that blocks oil or coolant ingress, while the keyway provides positive mechanical coupling to pulleys or couplings. A single-ended shaft on side A, with no extension on side B, simplifies guarding and coupling access in tight machine layouts. The compact housing also leaves more room for nearby guards, couplings, and cable bends in dense machine assemblies.