Product Description:

The MDD093B-N-030-N2L-130PL0 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled electrical power into precise rotary motion for positioning, speed regulation, and cyclic duties in industrial automation. Its mechanical interface, feedback system, and thermal characteristics are arranged to work with Indramat drives used in assembly cells, pick-and-place stations, and conveyor axes. This layout supports repeatable motion on machine axes that require accurate response during frequent starts, stops, and speed changes.

The motor reaches a nominal speed of 3000 rpm under rated conditions. At standstill, it delivers 14.5 Nm of continuous torque, which supports static load holding without overheating during normal operation. Position and velocity are reported through digital servo feedback (DSF), which sends high-resolution data to the controller for closed-loop correction. A centering flange diameter of 130 mm helps align the motor to the machine base and maintain concentricity. Mechanical power is transmitted through a shaft with a keyway, allowing keyed hubs to carry torque without slippage. Standard balancing helps limit residual vibration, and the electrical and feedback plugs are located on the left side of the motor.

Wiring enters from the left through a connector, which allows quick disconnection when the motor must be removed from the machine. A shaft seal surrounds the output journal to help limit the ingress of coolant or dust during operation. The motor uses a standard housing that fits common MDD mounting arrangements. Because the unit is supplied without a blocking brake, any load that must remain fixed after power is removed requires holding torque from the drive or a separate mechanical device. The B length code and 093 frame size keep rotor inertia within the tuning range of mid-power Indramat converters, which helps support fast indexing motion.