Product Description:

The MDD093B-N-030-N2L-130PB1 is a three-phase synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into controlled rotary motion in automated packaging lines, handling axes, and robotic joints. Permanent-magnet excitation supports fast torque response, while closed-loop operation allows accurate position control and stable velocity regulation. This motor type is suited to applications that require repeatable motion, controlled acceleration, and reliable operation through frequent start-stop cycles.

Its mechanical layout uses a centering flange with a diameter of 130 mm, and the rotor uses standard balancing to help reduce residual vibration during operation. The motor can produce a continuous standstill torque of 14.5 Nm, and under rated excitation it can reach 3000 rpm. An integrated blocking brake supplies 11 Nm of holding torque when power is removed, helping keep the axis in place during stopped conditions. Power and feedback connections exit on Side B, which keeps both cable groups on the same side of the housing. The B length code gives the motor a compact stack height, and the standard housing supports conduction cooling without additional fins.

Signal feedback is provided by Digital servo feedback (DSF), which reports rotor position directly to the controller for accurate commutation and motion control. The shaft uses a keyway and includes a fitted shaft seal, helping protect the bearings from splash exposure during normal service. There is no second shaft end on the opposite side, which keeps the drive-end arrangement straightforward. Frame size 093 indicates the motor's stator size, and the unit uses a Connector interface for power and feedback connections. The housing and centering surfaces are supplied in standard form so mounting alignment remains consistent on matching machine assemblies.