MDD093B-N-030-N2L-130PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259756
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
30 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2L-130PA2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 3000 rpm, continuous torque at standstill of 14.5 Nm, and includes a blocking brake with a torque of 22 Nm. This motor has standard housing, a centering diameter of 130 mm, and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2L-130PA2 servo motor is manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for digital drive controllers and converts regulated three-phase power into precise rotary motion for packaging, handling, and positioning equipment. Permanent-magnet excitation and balanced construction allow rapid torque rise while keeping vibration within limits for closed-loop motion systems. This motor is suited to applications that require accurate speed control, repeatable positioning, and stable response during changing loads. Its standard housing supports reliable installation in automated machinery.
The motor delivers a continuous standstill torque of 14.5 Nm, permitting load support without overheating. When power is removed, the built-in blocking brake applies 22 Nm of holding torque to secure vertical or suspended axes. This brake supports secure stopping on axes that must remain in place after shutdown. Under commanded motion, the rotor can reach 3000 rpm, which suits medium-inertia equipment driven by typical Rexroth inverters. Mounting is centered by a 130 mm pilot diameter that aligns the stator with the machine frame, and the motor uses a keyway shaft for positive torque transmission. A shaft seal limits lubricant escape, the shaft end is present only on the drive side, and the housing uses a natural-convection layout.
Electrical terminations exit on Side A of the housing, and the single power and brake plug uses a coded connector shell for quick connection and consistent cable orientation. Position and speed loops are closed through Digital servo feedback (DSF), eliminating the need for an external encoder. The feedback system supplies the drive with rotor data for commutation and controlled motion. Within the series, frame size 093 and length code B indicate the active stack height and thermal capacity. The combination of a shaft seal, standard housing, and balanced rotor supports IP65 installation when an appropriate mating connector is used.
Frequently Asked Questions about MDD093B-N-030-N2L-130PA2:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2L-130PA2 motor?
A: This motor has a continuous torque of 14.5 Nm at standstill.
Q: Is the MDD093B-N-030-N2L-130PA2 motor supplied with a holding brake?
A: The MDD093B-N-030-N2L-130PA2 is equipped with a holding (blocking) brake.
Q: What is the centering diameter of the MDD093B-N-030-N2L-130PA2?
A: The centering diameter for this motor is 130 mm.
Q: What type of motor feedback does the MDD093B-N-030-N2L-130PA2 feature?
A: This model uses digital servo feedback (DSF) for motor feedback.
Q: What is the shaft configuration on the MDD093B-N-030-N2L-130PA2 motor?
A: The shaft is keyway type and comes with a shaft seal for additional protection.
