MDD093B-N-030-N2L-130PA1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259592
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD093B-N-030-N2L-130PA1 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 3000 Min nominal speed, Digital Servo Feedback, a(n) Output Shaft with Keyway, and it is Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MDD093B-N-030-N2L-130PA1 digital AC servomotor portrays digital servo feedback. This servomotor needs to be protected against heavy loads and impacts on its shaft. The product is operated in industrial machinery. This device encompasses a temperature sensor within its windings to monitor its temperature and avoid overload damage. The unit has a B length code. Its power connector is bigger than the connector used with standard housing. It portrays high-performance data. This product comes with a keyway shaft. The device supports a maximum installation altitude of 5000m over sea level. This unit features the same frequency range of 9Hz to 200Hz for both axes with sinusoidal axes.
The motor installation is possible in any orientation in accordance with DIN IEC 34-7 specifications. Its shaft sealing does not prevent the complete penetration of liquids into the housing along the shaft. This product features a customized 130mm pilot diameter. This device encounters a multi-axial stress state at its shaft-hub connection point because of the loads encountered, bending and torsion. The unit cannot be used without reseating after storing it for more than two years. Its angle feedback connector is directed to the B side. This servomotor comes with a year’s backup support from Wake Industrial.
The product allows only soldering of its power cables that have inch diameters. This device has a 45.1Nm theoretical maximum torque. Its blocking brake does not provide a guarantee of personnel safety. The unit is balanced with an 8 x 7 x 40 matching key in accordance with DIN 6885-A specifications. Its screws in the threads of the center hole of the shaft have maximum tightening torque of 5Nm. This motor has 50 minutes and 45 minutes thermal time constant for natural convection as well as surface cooling. The product features a 60ms release delay and a 20ms clamping delay for the blocking brake. This servomotor is delivered to any desired destination.
