Product Description:

The MDD093B-N-030-N2L-130PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides precise torque and speed control to automated axes in packaging, printing, and material-handling lines. The design uses size 093 with the B length code, and it is supplied in the standard shaft-end configuration that omits a rear shaft extension. This layout suits single-ended drive arrangements and supports responsive closed-loop motion when paired with a compatible Indramat drive.

At standstill, the motor can sustain 14.5 Nm of continuous torque, enabling stable holding force during indexing or vertical load support. At rated operation, it reaches a nominal speed of 3000 rpm, giving the drive a broad operating range for rapid cycles. Machining accuracy is aided by the 130 mm centering pilot, which aligns the flange precisely to gearboxes or machine frames. Power and feedback conductors exit on Side A through a single connector, which helps reduce cable bends in tight spaces. Rotor position is resolved by Digital servo feedback (DSF), allowing the controller to apply high-bandwidth current loops. A shaft seal helps keep out coolant and dust, and the keyed shaft end supports direct coupling without an added hub.

The mechanically balanced rotor follows Standard balancing, so dynamic runout remains low even at the top operating speed. A Standard housing protects the stator windings without external fins or liquid jackets, keeping the motor body straightforward for enclosed machine installations. For applications that rely on drive torque alone to hold position, the motor ships without a blocking brake, which reduces weight and inertia. This configuration is suitable where the axis does not require mechanical holding at power-off or where separate external holding hardware is used. The housing exterior remains easy to clean because it does not use external cooling fins.