MDD093B-N-030-N2L-130GR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-030-N2L-130GR2 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a nominal speed of 3000 rpm and continuous torque at standstill of 14.5 Nm, with digital servo feedback for precise control. The motor has a plain shaft with shaft seal, a centering diameter of 130 mm, and comes equipped with a blocking brake providing 22 Nm of holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2L-130GR2 is a permanent-magnet servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for digital drive controllers, the unit supplies closed-loop torque and speed control to machining centers, pick-and-place gantries, and other industrial automation axes that require accurate acceleration, positioning, and stable operation. Its design combines an integrated position sensor with a blocking brake so motion can be commanded, monitored, and held when power is removed. This arrangement supports controlled starts, repeatable stopping behavior, and steady axis operation in multi-axis production equipment.
During installation, the centering pilot is 130 mm, allowing direct seating in compatible machine frames without extra sleeves. At standstill, the magnetic circuit delivers 14.5 Nm of continuous torque, and the blocking brake is rated at 22 Nm for holding the shaft when the axis is not driven. The rotor reaches a nominal speed of 3000 rpm, which suits common inverter operating ranges used in transfer systems and general motion applications. Position data are returned through digital servo feedback, allowing the controller to track shaft motion during operation. Power and feedback cables exit on the right side, which can help keep cable bends clear of nearby machine panels and fixed guarding.
The motor uses standard dynamic balancing and a standard housing to support smooth running and straightforward integration with couplings and gear-driven loads. Size code 093 places the motor in a medium frame that fits many existing machine layouts without requiring a large mounting footprint. A single connector carries power, sensor, and brake conductors, reducing the number of separate connection points at the motor body. The plain shaft includes a shaft seal to help retain lubricant and reduce the entry of dust or other contaminants around the shaft opening. The shaft end is provided only on the drive side, which keeps the rear end closed when no secondary output is needed.
Frequently Asked Questions about MDD093B-N-030-N2L-130GR2:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2L-130GR2 motor?
A: The MDD093B-N-030-N2L-130GR2 motor provides a continuous torque at standstill of 14.5 Nm.
Q: Does the MDD093B-N-030-N2L-130GR2 come with a holding brake?
A: This model is equipped with a blocking brake offering a holding brake torque of 22 Nm.
Q: What is the centering diameter of the MDD093B-N-030-N2L-130GR2 motor?
A: The centering diameter for this motor is specified at 130 mm.
Q: What type of feedback does the MDD093B-N-030-N2L-130GR2 motor use?
A: The MDD093B-N-030-N2L-130GR2 utilizes digital servo feedback (DSF) for motor positioning.
Q: What is the nominal speed of the MDD093B-N-030-N2L-130GR2 motor?
A: This motor has a nominal speed of 3000 min⁻¹, supporting reliable performance for standard applications.
