Product Description:

The MDD093B-N-030-N2L-110PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. The unit serves as a motor for digital drive controllers, providing closed-loop torque and speed control for automated handling, packaging, and machining axes. It has a standard housing configuration and length code B, which indicates a medium stack height for this motor platform.

At standstill, the motor can deliver a continuous torque of 14.5 Nm, permitting static load support without overheating when the controller supplies rated current. During motion, it reaches a nominal mechanical speed of 3000 rpm, which supports high-speed operation on automated axes. Precise machine alignment is aided by a centering shoulder of 110 mm, which locates the flange concentrically on gearboxes or mounting plates. For streamlined cabinet wiring, the power and feedback connectors are positioned on the right side, and both functions use a single sealed connector. Rotor position is reported through digital servo feedback (DSF), enabling high-resolution commutation and real-time monitoring.

A shaft seal limits dust or fluid ingress along the output journal, allowing installation in enclosures where occasional washdown or coolant mist is present. The motor uses standard balancing, so it can be coupled to properly graded pulleys or couplings without additional field balancing. The mechanical envelope corresponds to frame size 093, which keeps width and inertia suited to medium-power axes. Because the motor is supplied without a blocking brake, any vertical load must be held by external clamping devices or by drive torque during power-down. A standard keyed shaft without a side-B extension helps provide slip-free torque transfer to timing belts, couplings, or gearheads.