Product Description:

The MDD093B-N-030-N2L-110PL1 is a synchronous servo motor developed by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it converts inverter-supplied three-phase power into precise rotary motion. This lets automation axes hold position as well as follow target profiles in assembly cells, machine tools, and material-handling lines.

This model reaches a nominal speed of 3000 rpm, so drive programs can issue rapid velocity changes without losing synchronization between electrical frequency and mechanical output. At standstill, it can deliver 14.5 Nm of continuous torque, enabling static load support while closed-loop current control helps limit heating. A blocking brake is factory installed and can lock the shaft with 11 Nm of torque when power is removed, which is useful on vertical axes or during emergency stops. Mechanical coupling is through a shaft end with a keyway, and a shaft seal helps block coolant or oil ingress. The centering pilot on the mounting face measures 110 mm, providing repeatable alignment inside gearbox or flange bores. The motor uses the standard housing, B length code, and size 093 frame, which keep weight and inertia consistent with other motors in the series.

Cables exit on the left side because the power and feedback plugs are oriented in that direction, which can simplify routing in cabinets that use a single cable channel. The round power connector supports quick exchange without rewiring, while the encoder line carries digital servo feedback to the controller for high-resolution position detection. The rotor uses standard balancing, which helps limit vibration transmitted to bearings and couplings. The shaft end is on side A, without a side B extension, which helps keep the overall length short for tight installations.