MDD093B-N-030-N2L-110PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-030-N2L-110PL0 is part of the MDD Synchronous Motors series. This motor features a continuous torque at standstill of 14.5 Nm, a nominal speed of 3000 rpm, and uses digital servo feedback. It has a 110 mm centering diameter, a keyway shaft type with shaft seal, and a left-side electrical connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2L-110PL0 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts three-phase drive output into precise rotary motion for positioning and cyclic tasks in automated machinery. The motor is suitable for industrial axes that use gearboxes, ball screws, or direct-drive loads. Its compact housing supports installation in machinery where mounting space is limited.
The rotor uses standard balancing, which helps limit residual vibration in connected mechanics during operation. A centering shoulder of 110 mm aligns the flange on the machine face, and the motor has a frame designation of 093 for compatibility with common MDD mounting patterns. At its nominal operating point, the unit reaches 3000 rpm, which suits point-to-point moves and continuous duty on printing, packaging, or handling axes. While stationary, it can deliver 14.5 Nm of continuous torque for applications that require holding force. Internal windings connect through a sealed connector, and the finned housing supports convective cooling. There is no blocking brake, so load holding during power-off conditions must be provided externally or by drive torque.
Cables exit on the left side, which can simplify routing when the cabinet is placed on the motor's non-drive side. Feedback is provided through digital servo feedback (DSF), allowing high-resolution position control. A shaft seal surrounds the output journal to help limit dust or coolant ingress and protect the internal bearings. The output journal uses a keyway for torque transmission. Length code B and the single-stack stator keep the package short, and the standard shaft end on side A helps reduce installation depth in tight machine layouts.
Frequently Asked Questions about MDD093B-N-030-N2L-110PL0:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2L-110PL0?
A: This motor provides a continuous torque of 14.5 Nm at standstill.
Q: What is the nominal speed specification of the MDD093B-N-030-N2L-110PL0 motor?
A: The nominal speed of this motor is rated at 3000 min⁻¹.
Q: Does the MDD093B-N-030-N2L-110PL0 come with a holding brake?
A: This model does not include a holding brake.
Q: What type of motor feedback is used in the MDD093B-N-030-N2L-110PL0?
A: Digital servo feedback (DSF) is used for motor feedback on this unit.
Q: What shaft configuration and seal does the MDD093B-N-030-N2L-110PL0 have?
A: A keyway shaft with a shaft seal is featured on the MDD093B-N-030-N2L-110PL0.
