Product Description:

The Bosch Rexroth Indramat MDD093B-N-030-N2L-110PB0 is a synchronous servo motor in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current from an inverter into regulated mechanical rotation for positioning and speed-control tasks on automated lines, gantries, and packaging machines. By pairing permanent-magnet excitation with internal position feedback, the unit supports closed-loop motion control and helps reduce tracking error between the drive and the mechanical axis.

At standstill, the motor can deliver a continuous torque of 14.5 Nm, allowing it to support load demand during brief pauses without overheating. Under rated operating conditions, it reaches a nominal speed of 3000 rpm, providing a consistent velocity for indexing applications. The mounting interface uses a centering diameter of 110 mm, which helps align the motor accurately with the machine flange. The housing uses a standard enclosure style with length code B for moderate overall depth. The shaft has a front seal, and the motor is supplied without a blocking brake, so vertical load holding must be provided by external means. Only one shaft extension is present because the opposite end does not have a second output shaft.

Electrical power and feedback wiring exit from the rear of the stator, with all leads routed through the Side B face and terminated at a keyed Connector. Position information is provided through Digital servo feedback (DSF), which helps maintain stable signal quality over long operating periods. Torque is transmitted through a shaft with a keyway, which helps prevent slip during reversing motion. The frame size code 093 indicates the motor's housing size and supports use on medium-duty servo axes. Standard dynamic balancing is used to reduce residual vibration during acceleration.