MDD093B-N-030-N2L-110PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911262971
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
13 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2L-110PA2 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It features a nominal speed of 3000 min⁻¹, a continuous torque at standstill of 14.5 Nm, and includes a holding brake with 22 Nm of torque. This model has a keyway shaft, a centering diameter of 110 mm, and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2L-110PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. Built for pairing with digital drive controllers, it converts precisely modulated stator currents into controlled mechanical rotation for linear tables, packaging axes, and handling modules used across industrial automation. Tight coupling to the drive amplifier enables rapid torque buildup and dependable speed command tracking, which is important when workpieces or tooling must be positioned repeatedly within narrow tolerances on every machine cycle. That behavior supports accurate starts, stops, and speed changes in automated equipment that runs frequent short cycles.
Under continuous stall conditions, the motor can develop 14.5 Nm without exceeding its thermal limit, so static holding or low-speed feed tasks can be carried out without additional cooling hardware. For dynamic moves, it can accelerate the load up to a rated speed of 3000 rpm, which fits the operating range of many digital servo systems on mid-frame machines. A permanently mounted blocking brake provides 22 Nm of holding torque to secure vertical or suspended axes whenever system power is removed. Position information returns to the controller through digital servo feedback for high-resolution commutation and quick fault detection. Power is transferred through a keyway shaft, and a centering flange of 110 mm helps keep the motor aligned within the machine mount.
The electrical and feedback connectors are oriented on Side A, letting power and signal cables follow one routing path toward the cabinet. Because the connections leave from one end, cable bends can be kept away from adjacent moving parts in compact machine layouts. The motor uses frame size 093 with length code B, giving a medium housing depth that supports a balanced combination of torque capacity and overall mass. A standard housing and fitted shaft seal support regular industrial use, while the balanced rotor helps maintain smooth rotation during repeated acceleration and deceleration.
Frequently Asked Questions about MDD093B-N-030-N2L-110PA2:
Q: What is the continuous torque at standstill of the MDD093B-N-030-N2L-110PA2 motor?
A: The MDD093B-N-030-N2L-110PA2 provides a continuous torque of 14.5 Nm when at standstill.
Q: Does the MDD093B-N-030-N2L-110PA2 include a holding brake?
A: This motor is equipped with a blocking brake that offers a holding brake torque of 22 Nm.
Q: What is the centering diameter of the MDD093B-N-030-N2L-110PA2?
A: The centering diameter of this model is 110 mm, aiding in alignment during installation.
Q: What type of motor feedback does the MDD093B-N-030-N2L-110PA2 use?
A: This motor uses digital servo feedback (DSF) for precise position and speed control.
Q: What is the nominal speed of the MDD093B-N-030-N2L-110PA2 motor?
A: The nominal speed of the MDD093B-N-030-N2L-110PA2 is 3000 min⁻¹.
