Product Description:

Bosch Rexroth Indramat produces the MDD093B-N-030-N2L-110GR0, a synchronous servo motor in the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts bus-supplied DC power into controlled mechanical rotation for positioning and velocity loops in automated machinery. In this role, it responds to commanded current so the axis can maintain regulated motion during indexing, feeding, and synchronized machine movement. Its compact frame supports installation in distributed machine layouts. This makes it suitable for servo-driven equipment that depends on accurate starts, stops, and speed changes.

The motor delivers a continuous standstill torque of 14.5 Nm, enabling a stationary axis to support process loads without exceeding thermal limits. Under rated electrical conditions, it reaches a synchronous speed of 3000 rpm, which suits common servo axis speed ranges. Rotor position is reported through digital servo feedback (DSF), so the drive controller receives high-resolution angle data for closed-loop control. The output shaft is a plain shaft, and the unit is supplied without a blocking brake, so a separate holding method is needed if the load must remain fixed when power is off. Balancing is standard, and the right-hand connection orientation places the power and feedback plugs in one connector housing for more orderly cable routing.

The front flange includes a centering recess of 110 mm to help align the motor with attached gearboxes or pulleys. That centering feature helps keep the shaft axis aligned with mating components during installation and operation. A shaft seal protects the internal bearings from lubricants and fine particles near the work area. The motor has a length class of B and a frame size of 093. It also uses a standard housing with a single shaft end on side A only, which suits direct coupling arrangements where one drive end is required and surrounding machine space is limited.