Product Description:

The MDD093B-N-030-N2L-110GL0 is an AC synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical commands into rotary motion for positioning or velocity tasks in automated machinery. Its electromechanical construction suits applications that require precise speed control, quick acceleration, and consistent torque delivery across a compact 093 frame. The motor is intended for servo axes that need stable response during repeated start, stop, and speed-change sequences.

Mechanically, the rotor is factory balanced to a standard grade, and it centers on a 110 mm pilot to fit matching gearbox or flange mounts. Cabling exits on the left side through a sealed connector interface, an arrangement that simplifies routing in cabinets that stack multiple axes. A molded connector carries power and feedback lines while preserving the housing's standard enclosure form. At standstill, the motor can deliver 14.5 Nm of continuous torque without exceeding its thermal limits, and the windings support a rated speed of 3000 rpm for dynamic duty cycles. Position data are returned through digital servo feedback, allowing the drive to close control loops with fine resolution and stable response. The B-length stator provides the copper volume needed for these ratings while keeping the motor suitable for compact machine layouts.

The mechanical end of the assembly follows size 093 dimensions. A plain shaft omits any secondary side-B extension, so couplings mount only on the drive side. A fitted shaft seal helps protect the bearings when the motor operates in areas exposed to spray or fine dust. Because the unit is supplied without a blocking brake, holding force must come from the drive or an external clamp during power-off conditions. The standard aluminum housing and connector layout support orderly cable routing where adjacent machine components leave limited installation space.