Product Description:

The MDD093B-N-030-N2L-110GB0 synchronous servo motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise torque and velocity regulation are required in automated machinery. Within an industrial axis, the motor converts controlled electrical input into mechanical rotation, allowing coordinated positioning and speed control in packaging, printing, and material-handling equipment.

Under rated conditions, the motor reaches a nominal speed of 3000 rpm, which supports stable operation in servo loops. At standstill, it can deliver a continuous torque of 14.5 Nm, allowing the shaft to hold load without overheating during dwell periods. The centering diameter measures 110 mm, providing a precise seating surface that helps maintain concentricity between the motor flange and the driven machine element. Power and feedback conductors exit on side B of the housing, and the terminations use a keyed connector for a secure electrical interface. Standard dynamic balancing minimizes vibration, while the B-length stator gives the motor a moderate mass profile for mid-frame applications.

For position monitoring, the encoder channel uses digital servo feedback (DSF), which returns rotor position data to the drive so fine increments of motion can be commanded without loss of synchronization. Mechanical coupling is handled by a plain shaft, which lacks keyways and reduces stress concentrations when clamped hubs are used. Oil ingress at the shaft exit point is restricted by a design supplied with a shaft seal. The motor is delivered without a blocking brake, so any holding function must be provided by the drive or by an external brake module. Standard housing geometry and the absence of a secondary shaft end keep the overall package compact while preserving the thermal and dynamic performance expected from the 093 frame size.