Product Description:

The MDD093B-N-030-N2L-110GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, the unit supplies closed-loop rotary motion for axes that demand precise speed and position behavior in automated packaging, material-handling, and machining equipment. By interfacing directly with electronic drives, the motor turns commanded currents into torque that can be modulated in real time to match process requirements.

The motor delivers a continuous standstill torque of 14.5 Nm, allowing it to hold or slowly advance loads without overheating during prolonged dwell periods. When supplied with the rated stator frequency, its rotor can reach a nominal velocity of 3000 rpm, a speed point selected to match typical ball-screw and timing-belt transmissions. Accurate mechanical registration to machine frames is aided by a 110 mm centering diameter, which constrains radial runout at the mounting pilot. Power and feedback connections exit on side A, which helps cable routing inside multi-axis cabinets. Motion is transferred through a plain shaft, permitting direct coupling or the use of standard keyless clamping hubs.

Rotor position data is returned through integrated digital servo feedback, giving the controller high-resolution incremental and absolute information for tight velocity loops. A fitted shaft seal limits lubricant migration and protects interior laminations from coolant spray encountered in machine tools. The unit is supplied without a blocking brake, so external holding mechanisms or drive torque must maintain position when power is removed. Its mechanical envelope follows the series' B length code, balancing thermal mass and footprint for installations where cabinet depth is limited yet continuous torque density must remain high.