MDD093B-N-020-N2M-130PL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-020-N2M-130PL1 is a motor from the MDD Synchronous Motors series, featuring an integrated multiturn absolute encoder and digital servo feedback. It delivers a continuous torque at standstill of 14.5 Nm and is equipped with a holding brake rated at 11 Nm. The motor has a centering diameter of 130 mm and uses a keyway shaft type with a standard housing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-020-N2M-130PL1 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended to work with digital drive controllers where regulated torque and position are required for automated machinery. The motor’s internal multiturn encoder, frame construction, and blocked-rotor brake allow a control system to command accurate motion cycles on assembly cells, packaging equipment, or light-duty spindles without external transducers. Closed-loop feedback lets the paired drive monitor both shaft position and accumulated revolutions during normal operation.
This model supplies a continuous standstill torque of 14.5 Nm, so an axis can support static loads while energized without overheating. The motor has a nominal speed of 2000 rpm, giving the drive a stable operating point for positioning and speed control. Alignment to a machine plate is simplified by the 130 mm centering diameter, which helps maintain a coaxial fit with couplings or gearboxes. Power and feedback lines exit on the left side, which can simplify cable routing where space is limited. The shaft uses a keyway for positive torque transfer to the driven element. Position and revolution count come from an integrated multiturn absolute encoder, feeding digital servo feedback to the controller for closed-loop regulation.
During power-off or emergency stop, a holding device delivers 11 Nm of brake torque to keep the load in place until drive power is restored. Electrical terminations use a quick-locking connector, which provides a secure interface for power and feedback wiring. The motor falls under frame size 093, matching the housing geometry used for this model. A factory-balanced rotor, a shaft seal, and a standard housing help support smooth running and protect internal components from contamination during regular machine operation. The single-ended shaft arrangement also leaves the opposite end clear, which helps when the motor is coupled directly to a machine element or gearbox.
Frequently Asked Questions about MDD093B-N-020-N2M-130PL1:
Q: What type of encoder does the MDD093B-N-020-N2M-130PL1 motor use?
A: The MDD093B-N-020-N2M-130PL1 is equipped with an integrated multiturn absolute encoder.
Q: Does the MDD093B-N-020-N2M-130PL1 motor have a holding brake?
A: This model includes a blocking brake with a holding torque of 11 Nm.
Q: What is the continuous torque at standstill for the MDD093B-N-020-N2M-130PL1?
A: The continuous torque at standstill for this motor is rated at 14.5 Nm.
Q: Which direction does the electrical connection exit on the MDD093B-N-020-N2M-130PL1?
A: The connection direction for this model is specified as left.
Q: What shaft configuration does the MDD093B-N-020-N2M-130PL1 have?
A: The shaft type for this motor features a keyway and is supplied with a shaft seal.
