MDD093B-N-020-N2M-130PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-020-N2M-130PB0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a 130 mm centering diameter, offers a continuous torque at standstill of 14.5 Nm, and operates at a nominal speed of 2000 rpm. This motor comes with an integrated multiturn absolute encoder, digital servo feedback, and uses a standard housing with a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-020-N2M-130PB0 servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current from an inverter into torque for positioning and speed-controlled axes in industrial automation. Its electromechanical design targets medium-inertia loads where repeatable motion and accurate feedback are required on packaging lines, printing equipment, and general CNC stages. This makes the unit suitable for closed-loop motion tasks that require repeatable starts, stops, and speed changes.
At the mechanical interface, the centering pilot measures 130 mm, allowing rigid mounting to compatible flanges. The rotor can continuously deliver 14.5 Nm at standstill, so the drive can hold static loads without overheating. Dynamic operation reaches a nominal speed of 2000 rpm, matching inverter outputs designed for moderate-speed machining. Power and feedback conductors exit on side B of the housing through a sealed connector, which helps simplify cable routing inside cabinets. Position data is supplied by an integrated multi-turn absolute encoder, giving the controller the exact shaft angle over multiple revolutions. Standard balancing and a standard cast housing help limit vibration during operation. A shaft seal blocks contaminants at the drive end, and motor length code B indicates the overall stack length. A standard shaft end is provided on the drive side, while the opposite side is closed.
Feedback signals use Digital servo feedback (DSF), so compatible drive controllers can read high-resolution position and commutation data without adapters. The output shaft uses a keyway profile that helps pulleys or couplings resist slip during acceleration. For applications that rely on external mechanical holding devices, the unit is supplied without a blocking brake, reducing mass and eliminating brake-release wiring. The frame size code 093 identifies the housing size used for this motor.
Frequently Asked Questions about MDD093B-N-020-N2M-130PB0:
Q: What is the continuous torque at standstill for the MDD093B-N-020-N2M-130PB0 motor?
A: The MDD093B-N-020-N2M-130PB0 motor delivers a continuous torque of 14.5 Nm at standstill.
Q: What type of encoder is included with the MDD093B-N-020-N2M-130PB0 motor?
A: This model is equipped with an integrated multiturn absolute encoder for precise position feedback.
Q: What connection type and direction does the MDD093B-N-020-N2M-130PB0 motor use?
A: The MDD093B-N-020-N2M-130PB0 uses a connector for its electrical connection on side B of the motor.
Q: What shaft features does the MDD093B-N-020-N2M-130PB0 include?
A: A shaft with keyway and shaft seal is featured on this motor, helping maintain alignment and reduce contamination.
Q: Does the MDD093B-N-020-N2M-130PB0 come with a holding brake?
A: This motor operates without a holding (blocking) brake, so external options must be considered if braking is required.
