MDD093B-N-020-N2M-130GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-020-N2M-130GB2 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It features a continuous torque at standstill of 14.5 Nm and a nominal speed of 2000 per minute. This motor includes an integrated multiturn absolute encoder and comes with a blocking brake providing a holding torque of 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-020-N2M-130GB2 is a synchronous AC servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive current into rotary motion with the closed-loop precision needed in automated positioning, indexing, and process lines. Its integrated feedback arrangement allows the drive amplifier to monitor rotor behavior directly and correct speed or torque during operation. This supports steady motion in axes that must start, stop, and reverse without large tracking errors during normal machine cycles. Because the feedback hardware is built into the motor, the installation does not require a separate external sensing assembly at the load.
At stall, the rotor can deliver 14.5 Nm of continuous torque, enabling the axis to resist static loads without overheating. When commanded to rated velocity, it reaches a nominal speed of 2000 rpm, which suits moderate-speed material handling and tooling applications. A blocking brake is fitted, and its static holding capability is 22 Nm, so vertical loads can remain locked when power is removed. Position and velocity signals are returned through digital servo feedback, while absolute position is resolved by an integrated multiturn absolute encoder. These feedback elements allow the connected drive to read motion data immediately after startup and maintain accurate control over repeated travel sequences.
A centering journal diameter of 130 mm aligns the flange with gearboxes or machine plates. Power and feedback connectors exit on side B, which can simplify cable routing when the cabinet sits behind the axis. The motor uses plug-in connectors instead of fixed leads, so the wiring interface stays compact at the housing. The rotor is dynamically balanced to a standard grade for routine servo operation. The output uses a plain shaft and is fitted with a shaft seal to help limit lubricant migration into the housing. The size code is 093, the length code is B, the housing is standard, and there is no secondary shaft end.
Frequently Asked Questions about MDD093B-N-020-N2M-130GB2:
Q: Does the MDD093B-N-020-N2M-130GB2 motor come with a holding brake?
A: This model includes a blocking holding brake with a torque of 22 Nm.
Q: What type of encoder is used in the MDD093B-N-020-N2M-130GB2 motor?
A: The MDD093B-N-020-N2M-130GB2 has an integrated multiturn absolute encoder.
Q: What is the continuous torque at standstill for the MDD093B-N-020-N2M-130GB2?
A: This motor provides a continuous torque of 14.5 Nm at standstill.
Q: What type of shaft and seal does the MDD093B-N-020-N2M-130GB2 feature?
A: A plain shaft with a shaft seal is standard on this model, providing protection and direct coupling.
Q: What is the nominal speed of the MDD093B-N-020-N2M-130GB2 synchronous motor?
A: The nominal speed for this motor is rated at 2000 min⁻¹.
