Product Description:

The MDD093B-N-020-N2M-110PL0 is a rotary servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated current from a compatible Indramat drive into mechanical rotation for positioning and speed-controlled tasks in automated machinery. Its electromagnetic design suits medium-inertia applications that need accurate response and stable continuous operation on assembly lines, printing machines, and material-handling axes. Because the motor is intended for controlled servo operation, it supports closed-loop motion behavior under changing process loads.

At standstill, the motor can deliver a continuous torque of 14.5 Nm, allowing it to support loads during prolonged dwell periods without excessive heat buildup. The motor reaches a nominal speed of 2000 rpm, which suits motion profiles that favor moderate rotational speed with solid torque output. A 110 mm pilot diameter centers the motor on the machine frame, and the shaft is balanced to the standard grade to help limit vibration during operation. Power and feedback leads exit on the left side, and a keyed circular connector supports orderly cable routing in compact installations.

Feedback and diagnostic data are returned through Digital servo feedback (DSF), and position is measured by an embedded integrated multi-turn absolute encoder that retains shaft count across power cycles. The housing is fitted with a shaft seal, and torque is transmitted through a keyway shaft for use with standard hub connections. The motor is supplied without a blocking brake, so vertical axes require an external holding method when power is removed. It also uses a standard housing finish, motor size 093, length code B, and a single shaft end, which keep the physical layout clear for machine integration.