Product Description:

The MDD093B-N-020-N2M-110PA1 is built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. This AC servo motor is intended for use with digital drive controllers, where torque, speed, and position are regulated electronically. It converts electrical commands into rotary motion for axis control in automated assembly lines, packaging stations, and machine tools. That operating role makes it suitable for positioning tasks that require repeatable response to changing command signals. The motor uses a standard housing and standard balancing, and it is supplied with a shaft seal to help limit particulate ingress at the output end.

A centering flange diameter of 110 mm lets the motor locate accurately against a gearhead or mounting plate. The stator windings provide a continuous standstill torque of 14.5 Nm without exceeding thermal limits, which supports static holding and low-speed motion without excessive heating. During operation, the rotor reaches a nominal speed of 2000 rpm for repeatable velocity tracking on production axes that run at steady process speeds. Power and feedback leads exit on Side A through a sealed connector set, which keeps the cable connection organized near the mounting face. Position data returns to the drive through Digital servo feedback (DSF) for closed-loop control across multi-axis systems.

A holding brake rated at 11 Nm secures the load when the drive is disabled and keeps the shaft fixed without external clamps. Motion feedback is also available from the Integrated multiturn absolute encoder, so the controller retains full revolution counts after power cycles and can recover position data immediately after startup. The motor has a frame size of 093 and a rotor length code of B, which keeps the housing compact for medium-power axes. Its output uses a single-ended keyway shaft, and the shaft seal remains in place at the output end to support enclosed machine installations.