Product Description:

The MDD093B-N-020-N2M-110PA0 is a synchronous AC servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It converts commanded current into rotary motion for precise positioning of conveyors, gantries, and machine-tool axes in digitally controlled systems. When the motor is coupled directly to the load, the drive train can reduce backlash and support the tight position and speed loops required in automated production equipment. This arrangement makes the motor suitable for packaging, handling, and general automation equipment that depends on repeatable servo response during frequent motion cycles.

At a nominal speed of 2000 rpm, the unit sustains a continuous standstill torque of 14.5 Nm, allowing the axis to hold static loads without overheating. The rotor is balanced to a standard grade to help limit vibration during operation. A centering diameter of 110 mm supports concentric mounting against gearboxes or precision flanges, and the B frame length sets the housing depth used in machine layouts. Motion feedback is supplied by an integrated multiturn absolute encoder, and its signals are transmitted as digital servo feedback (DSF) so the drive can monitor rotor position over multiple revolutions. Motor size 093 places the unit in a mid-range power class suited to packaging and handling equipment.

Electrical and feedback connections use a connector on side A of the frame, which helps keep cable routing within the machine envelope. The standard housing also resists coolant splash in normal industrial service. The shaft uses a shaft seal to reduce lubricant loss at the front bearing and to help protect the bearing area. Power is transmitted through a keyway on the single-ended shaft, and no secondary shaft is provided on side B. The motor is supplied without a blocking brake, so applications that need load holding on vertical axes require external clamping or drive-generated holding torque.