Product Description:

The MDD093B-N-020-N2M-110GR2 is a synchronous AC servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotary motion for industrial automation equipment. This arrangement supports positioning and speed-controlled axes that require repeatable torque delivery and continuous closed-loop regulation during operation. It is commonly used in feed axes, transfer units, and other machine sections where smooth acceleration and accurate stopping are required through repeated duty cycles and varying loads.

The motor delivers a continuous standstill torque of 14.5 Nm, which gives the axis stable holding capability while the shaft remains at zero speed. During normal operation, it reaches a nominal speed of 2000 rpm, which suits medium-speed positioning tasks and coordinated machine movement. An integrated blocking brake supplies 22 Nm of static torque so suspended or vertical loads can remain secured when drive power is removed. Accurate mechanical alignment is supported by the 110 mm centering diameter at the mounting face. Position information is returned through digital servo feedback, allowing the controller to monitor rotor motion with high resolution.

Power and feedback leads exit on the right side through a connector, which helps route cables cleanly in compact installations. Torque is transmitted through a plain shaft with a shaft seal to help limit the entry of dust or oil at the drive end. An integrated multiturn absolute encoder provides both angular position and revolution count, so the system can retain position information without a reference run after power-up. The housing uses a standard cooling surface rather than an auxiliary fan, and the shaft is provided only on side A because there is no extension on side B. Standard balancing also helps keep vibration low during normal machine operation and supports stable coupling behavior.