Product Description:

The MDD093B-N-020-N2M-110GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical commands into controlled mechanical motion for positioning and velocity tasks in automated machinery. This motor is suited for closed-loop operation on handling, packaging, and assembly axes where repeatable response is required during start, stop, and speed changes. Its frame size 093 and length code B place it in the mid-torque range of the product line, making it suitable for general industrial motion duties.

The motor supplies a continuous standstill torque of 14.5 Nm, allowing it to hold load at zero speed without thermal overload under rated conditions. Precise mounting is aided by a centering diameter of 110 mm, which helps align the motor on compatible machine flanges. Under rated conditions, the rotor reaches a nominal speed of 2000 rpm, giving the drive a useful operating range for moderate axis speeds. Power and feedback lines connect through a connector on the right side of the housing, which helps keep cable routing orderly in compact machine layouts. Rotor position is monitored by an integrated multiturn absolute encoder, so the controller can retain position information after a power cycle.

Command signals are returned to the controller through digital servo feedback (DSF), providing high-resolution angle data for tight velocity and position control. Mechanical power is delivered through a plain shaft fitted with a shaft seal, which helps protect the internal bearing area from contamination. The rotor uses standard balancing to reduce vibration across the speed range during normal operation. The motor has a single shaft end and is built without a blocking brake, so any load that must remain fixed after power removal needs external holding.