Product Description:

The MDD093B-N-020-N2M-110GB2 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to work with a digital drive controller, the unit converts commanded current into precise shaft movement for positioning tables, pick-and-place actuators, and other motion axes used in automated production cells and test equipment. Because the motor includes integrated feedback hardware, the system only needs power, signal, and brake connections for operation. Its standard enclosure also allows direct mounting in clean or lightly contaminated environments.

Mechanical alignment starts with a centering diameter of 110 mm, which fits flange cutouts common to size-093 frames and helps keep mounting accurate. During static operation, the motor can deliver 14.5 Nm of continuous torque, allowing steady load support without thermal overloading of the windings. Dynamic tasks are supported by a nominal speed of 2000 rpm, which gives the drive a suitable operating range for controlled axis motion. Electrical terminations are routed on Side B and enter through a sealed connector, which helps simplify cable routing in compact machine layouts. The motor has a plain housing and a B length code, which establish the overall body depth.

Position control fidelity is maintained by digital servo feedback (DSF) working with an integrated multiturn absolute encoder, so the drive receives absolute angle data after every power-up. For safety during power loss, a blocking brake rated at 22 Nm engages to hold the axis until torque is restored. The drive side uses a plain shaft, and contaminants are kept out by a shaft seal, which helps reduce lubricant migration into the bearing zone. The brake, seal, and feedback devices are all contained within the same frame, which helps conserve axial space inside the machine compartment.