MDD093B-N-020-N2M-110GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265827
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
17 Seconds
The Bosch Rexroth Indramat MDD093B-N-020-N2M-110GA2 is part of the MDD Synchronous Motors series and features a plain shaft with a centering diameter of 110 mm and a shaft seal. This motor provides a continuous torque at standstill of 14.5 Nm and a nominal speed of 2000 min⁻¹. It is equipped with an integrated multiturn absolute encoder and a blocking brake with a brake torque of 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-020-N2M-110GA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded electrical power into regulated rotary motion for positioning tables, gantries, and other industrial automation axes. Its mechanical interface, feedback format, and integrated brake suit standard drive modules used for closed-loop motion. This layout supports repeatable positioning in machines that need controlled acceleration and stable holding behavior.
The motor delivers a continuous torque at standstill of 14.5 Nm, allowing stable force output when the shaft is locked. Under rated electrical excitation, it can reach 2000 rpm, which is suitable for medium-inertia loads in transfer lines and packaging equipment. Rotor alignment to the mating flange is maintained by a 110 mm centering diameter, and the rotor is balanced to the manufacturer’s standard grade to limit vibration. Power and feedback cables exit on Side A, and the motor uses a connector interface for electrical connection. An integrated multi-turn absolute encoder is built in so the drive controller can recover position data after a power cycle. The cast aluminum housing uses the standard design and has no auxiliary cooling.
Dimensional coding identifies the frame as size 093 with length code B, giving a compact profile for multi-axis mounting. Position feedback is transmitted through digital servo feedback (DSF) signaling, which matches compatible drive controllers without extra adapters. A blocking brake integrated at the non-drive end supplies 22 Nm of static holding torque for vertical or other load-bearing axes. To prevent lubricant loss and particle ingress, the motor includes a shaft seal, and the shaft itself is machined as a plain cylinder without keyways. The design also uses the standard shaft-end arrangement, so no second shaft extends from side B, and the plain shaft supports connection to zero-backlash couplings.
Frequently Asked Questions about MDD093B-N-020-N2M-110GA2:
Q: What type of encoder does the MDD093B-N-020-N2M-110GA2 motor have?
A: This model is equipped with an integrated multiturn absolute encoder.
Q: What is the holding brake torque on the MDD093B-N-020-N2M-110GA2?
A: The motor features a blocking brake with a holding brake torque of 22 Nm.
Q: What is the nominal speed of the MDD093B-N-020-N2M-110GA2 synchronous motor?
A: The nominal speed of this motor is 2000 min⁻¹.
Q: What type of motor feedback does the MDD093B-N-020-N2M-110GA2 provide?
A: Digital servo feedback (DSF) is used for motor feedback in this model.
Q: What type of shaft and sealing does the MDD093B-N-020-N2M-110GA2 include?
A: The shaft on this motor is a plain shaft with a shaft seal.
