MDD093B-N-020-N2M-110GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911266697
The Bosch Rexroth Indramat MDD093B-N-020-N2M-110GA0 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It offers a continuous torque at standstill of 14.5 Nm, features an integrated multiturn absolute encoder, and has a nominal speed of 2000 revolutions per minute. This motor uses a plain shaft with a 110 mm centering diameter and comes with a connector-type electrical connection on Side A.
Internal Product Review
The MDD093B-N-020-N2M-110GA0 is a motor for digital drive controllers designed for precise servo applications. Integrated multiturn absolute encoder and digital servo feedback support accurate position control and dependable closed-loop performance. The 14.5 Nm continuous standstill torque rating and 2000 min⁻¹ nominal speed make the motor a strong choice for dynamic motion systems.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-020-N2M-110GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts modulated three-phase current into controlled mechanical rotation for positioning and speed tasks in automated machinery. The motor includes a multi-turn absolute encoder so the drive can read precise rotor angle for closed-loop motion control in high-accuracy assembly lines and material-handling axes. This arrangement allows the control system to track position continuously during acceleration, deceleration, and low-speed holding.
At standstill, the rotor can deliver a continuous torque of 14.5 Nm, allowing the axis to hold loads while current is maintained. That output supports steady holding duty in indexing tables and feed axes that remain energized between moves. During operation, the shaft reaches a nominal speed of 2000 rpm, which suits general-purpose positioning and velocity applications. The mechanical interface uses a centering diameter of 110 mm, which provides a locating surface for rigid coupling to gearboxes or flanges. Power and feedback cabling exit on Side A, which keeps cable routing on one face of the motor. A sealed connector provides the electrical connection without opening the housing.
Position data is transmitted through digital servo feedback, which avoids analog drift and supports accurate control across the speed range. The unit is supplied without a blocking brake, so vertical loads must be secured by drive torque or an external holding device during power-off states. The shaft is fitted with a shaft seal, which helps limit lubricant escape and contaminant entry. The motor uses size 093 with B length, and standard dynamic balancing helps reduce vibration during rotation. The plain shaft end also supports direct coupling to external transmission components without adding a keyed interface.
