Product Description:

The MDD093B-N-020-N2L-130PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical energy into controllable mechanical rotation for coordinated motion in assembly cells, material-handling stations, and machining modules. Standard balancing helps minimize vibration during operation, which supports stable motion in automated equipment.

This model can supply a continuous standstill torque of 14.5 Nm, allowing an axis to hold a load without overheating while the rotor is locked. During normal operation, it reaches a nominal speed of 2000 rpm, a velocity that balances dynamic response with thermal limits. An integrated blocking brake generates up to 11 Nm of holding torque, so vertical or suspended loads can remain fixed when power is removed. Mounting accuracy is supported by a centering diameter of 130 mm, which helps place the motor concentrically in a machine frame. Position and velocity data are returned through digital servo feedback, enabling the drive controller to close the control loop with high resolution. Power and feedback conductors exit on Side A of the housing, which can simplify cable routing when the motor is installed against a panel or gearbox.

The housing uses a standard enclosure profile, and a shaft seal helps keep lubricants inside while limiting contaminant entry. The single-ended shaft uses a keyway for positive torque transmission, and the motor frame size of 093 matches couplings and gear ratios common to this power class. Length code B gives the motor a compact body that can ease installation where space is limited. Electrical terminations are made through a removable connector, which maintains shield continuity and supports orderly cable routing.