Product Description:

The MDD093B-N-020-N2L-130GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. This model is intended for use with digital drive controllers, converting regulated drive output into rotary motion for indexers, gantries, and similar axes in industrial automation. It is used where accurate speed control and repeatable movement are required, providing the link between electronic command signals and mechanical motion. Its synchronous design allows the drive to regulate torque and rotor position precisely during acceleration, deceleration, and steady-state running.

A nominal speed of 2000 rpm gives the motor a useful operating range for mid-speed positioning duties and compatibility with common gear reductions. At standstill, it can produce 14.5 Nm of continuous torque, which supports controlled holding through the drive during normal operation. Alignment to adjoining machine components is set by a 130 mm centering diameter. Power and feedback conductors exit on side B, and a keyed connector provides a secure electrical interface. Shaft balance is kept within the standard grade to help limit vibration during routine operation. The motor uses size code 093 with length code B, giving it the mounting proportions associated with this frame.

Position information is supplied through digital servo feedback (DSF), allowing the controller to monitor motor movement with high resolution. This feedback method supports closed-loop speed and position regulation in the matching drive system. The output end uses a plain shaft, and it is fitted with a shaft seal to help keep lubricant away from the encoder area. The motor is supplied without a blocking brake, so applications that need static holding after power removal must rely on a separate clamping method or controlled motor torque. The shaft end is the standard version without machining on the opposite side, and the housing uses the standard design without additional coatings while still protecting internal windings from airborne contaminants.