Product Description:

The MDD093B-N-020-N2L-110PR0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for integration with digital drive controllers where precise velocity and position loops are required on automated axes, conveyors, or tooling stations. By converting electrical commands from the drive into controlled rotary motion, the unit acts as the electromechanical actuator in industrial automation cells. Its operating profile suits machines that need repeatable motion and stable response during start-stop cycles.

The motor delivers a continuous standstill torque of 14.5 Nm, giving the drive enough margin to hold loads or maintain tension without overheating. When commanded to its nominal operating point of 2000 rpm, the rotor speed supports stable process rates in synchronized motion tasks. Position information returns through Digital servo feedback (DSF), enabling high-resolution closed-loop control and automatic parameter identification. Installation is simplified because the power and signal terminals face the right side, and the plug-in connector interface supports direct cable attachment with consistent routing.

A centering diameter of 110 mm aligns the motor housing with precision mounting flanges, and the output uses a shaft with a keyway for positive torque transmission to couplings or pulleys. The design includes a shaft seal, which helps limit the entry of dust and other particles around the shaft opening. The motor is supplied without a blocking brake, so static holding force must come from the drive or an external device when the axis is stopped. The single-ended shaft, size 093 frame, and B motor length support installation in machine layouts that already use this MDD mounting pattern. Standard dynamic balancing and a standard housing help keep vibration transfer to the machine structure under control.