Product Description:

The MDD093B-N-020-N2L-110GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies position and velocity control in automated machinery. It conveys torque directly to the load while encoder data closes the drive loop. This arrangement supports controlled motion on axes that must start, stop, and hold position with repeatable accuracy.

This motor uses a centering pilot of 110 mm to align the housing during flange mounting, and its electrical and feedback connectors are oriented on the right side to simplify cable routing. At standstill, it can deliver 14.5 Nm of continuous torque, allowing stable force output for static or low-speed duties. The rotor is designed for a nominal operating speed of 2000 rpm, which suits applications that favor lower speed and higher torque. Position information returns to the controller through digital servo feedback, supporting high-resolution velocity regulation and accurate closed-loop operation. The motor has size code 093 and a B length code, which correspond to the frame size and active stack depth. Standard dynamic balancing limits vibration, and the housing uses the standard thermal dissipation layout for this series.

A blocking brake is integrated and can clamp the shaft with 22 Nm of torque to secure vertical axes during power loss. There is a shaft seal that helps keep lubricants in and contaminants out, which supports longer bearing life in dusty environments. The single-ended construction provides a plain shaft on side A only, while side B remains closed and has no auxiliary shaft extension. This layout keeps the non-drive end compact. Connection hardware uses a circular connector, which keeps the interface compact and supports secure cable attachment.