Product Description:

The MDD093B-N-020-N2L-110GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and supplies rotary power to axes that depend on closed-loop control for accurate position and speed regulation in packaging lines, gantry systems, and material-handling equipment. In these applications, the motor converts commanded current into controlled shaft motion so the paired drive can maintain repeatable travel, steady acceleration, and consistent response under changing loads.

This model delivers a continuous standstill torque of 14.5 Nm, allowing the drive to hold or slowly index loads without overheating. Its nominal speed is 2000 rpm, which is the rated shaft velocity when the motor and drive operate under matching electrical conditions. A centering diameter of 110 mm provides the reference fit for flange mounting and supports accurate alignment with couplings or gearboxes. The motor uses size code 093, which places it in the corresponding frame dimensions of the series. Position data are returned through Digital servo feedback for high-resolution commutation, and the plain shaft accepts user-selected drive elements for direct mechanical connection.

Mechanical balance is set to a standard grade, and the housing is supplied in a standard form. Length code B keeps the motor depth moderate, while the unit comes without a blocking brake, so idle loads must be secured by external holding force or drive torque. The shaft is finished only on side A, while side B remains closed to reduce contaminant entry paths. Power and feedback terminations face Right, and a single connector carries both circuits for a compact cable layout. A shaft seal helps limit oil or coolant ingress along the output journal during operation.