MDD093B-N-020-N2L-110GA0
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911245761
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD093B-N-020-N2L-110GA0 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 2000 Min nominal speed, Digital Servo Feedback, a(n) Plain Output Shaft, and it is Not Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MDD093B-N-020-N2L-110GA0 digital AC servomotor has B size code. This motor is used in robotics as well as packaging, printing, textile and tool machines. The product offers assurance of high contouring accuracies at a high feed rate. This device features completely sealed housing. This unit can be put to operation under poor environmental conditions. Its rotor has 22 x 10-4 kgm2 moment of inertia. The motor has a high cyclic load capacity. The product features efficient heat conduction from the windings of the stator to the exterior walls of its housing. The device is equipped with a plain shaft for non-positive and backlash-free torque transmission.
This product has Class F insulation. The device is intended to support storage and transportation between -20°C and 80°C. The unit has a 210.3A peak current rating and 45.1Nm theoretical maximum torque. It requires a cable with a minimum AWG 8 cross-section for its power connection. The motor shaft has a 110mm centering diameter. The power connection of the product is directed to the A-side. The device uses a feedback cable that offers absolute resistance to greases and mineral oils. This MDD093B-N-020-N2L-110GA0 motor has a year’s Wake Industrial warranty and can be sent to your address in any country worldwide.
The AC motor has to be stored in a shock-free, dust-free and dry environment. The product must neither be dropped nor tipped during transport and storage. This unit has a nameplate with its type designation and technical details. It must be taken care to not apply load on the motor when it is being stored and/or transported. The motor housing coat tends to peel due to frequent cleaning of the housing with a steam cleaner. The shaft sealing ring in this product does not provide complete assurance of preventing liquid penetration into the housing. Its floating and fixed bearings absorb the radial and axial forces respectively.
