Product Description:

The MDD093B-F-020-N2L-110GA0 is a synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it translates current loop commands into tightly regulated rotary motion, supporting packaging lines, indexing tables, and other production equipment that require repeatable positioning and stable speed control. Its synchronous design helps the drive maintain accurate response during start-stop cycles and continuous operation. This makes it suitable for axes that need smooth acceleration, controlled deceleration, and repeatable motion over frequent duty cycles.

Mechanically, the unit uses standard balancing to limit vibration during acceleration. Its centering pilot measures 110 mm, which helps position the 093-frame housing accurately when it is clamped to machine flanges. The housing is engineered for liquid cooling, so external coolant removes heat instead of relying on surface convection. Continuous torque at standstill reaches 14.5 Nm, while the nominal speed is rated at 2000 rpm. This combination suits drives used with medium-inertia loads. Power and encoder leads exit on side A through a sealed connector, and a shaft seal helps keep fluid away from the bearing set. Size code 093 and length code B provide a moderate overall envelope, and the cooling path helps keep winding temperature stable during high RMS current conditions.

Control accuracy is maintained by the integrated digital servo feedback system, which transmits high-resolution rotor position data to the drive electronics. The motor is supplied without a blocking brake, so applications that need static holding force must rely on external clamping devices or active drive torque. A plain shaft with a standard single-ended configuration transmits torque through friction couplings, and there is no side B shaft end. Because feedback and power share the same routing zone, cable runs stay organized and the motor fits more easily in confined spaces.