Product Description:

The MDD093A-N-060-N2L-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where electrical commands are converted into controlled rotary motion for industrial automation equipment. The A-length housing and 093 frame size give the motor a compact footprint while still supporting high shaft speed for positioning, feeding, and light-duty spindle axes. This combination is well suited to machines that need fast response and accurate motion without taking up unnecessary installation space.

Mechanical design uses standard dynamic balancing to limit vibration transmitted to adjoining structures during operation. A centering pilot of 130 mm aligns the flange precisely, while cable terminations are placed on side B through a plug-in connector that keeps wiring organized in compact machine layouts. The motor delivers 9.2 Nm of continuous standstill torque, allowing it to support load at zero speed when the axis is controlled by the drive. Under rated excitation, the rotor can reach 6000 rpm, which supports rapid acceleration and the high cycle rates often required in packaging and pick-and-place applications.

Closed-loop control relies on integrated digital servo feedback that returns high-resolution position data to the controller for precise speed and position regulation. The unit is supplied without a blocking brake, so any axis that must remain fixed after power removal needs an external holding method or maintained drive torque. Power is transmitted through a keyway shaft, and the factory-fitted shaft seal helps reduce contaminant entry at the journal in normal industrial environments. The standard sealed housing and single drive-side shaft keep the overall package compact, which helps the motor fit into enclosed machine spaces where mounting room is limited.