Product Description:

The MDD093A-N-060-N2L-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts three-phase power into controlled rotation for automated pick-and-place modules, gantry axes, and spindle drives. Its compact 093 frame and A-length housing help limit moving mass on dynamic axes, which supports responsive positioning and faster acceleration. This layout also suits installations where axial space is limited around the machine frame. The motor is intended for repeatable motion tasks that need accurate control without requiring an oversized housing.

A nominal speed of 6000 rpm supports short cycle times, and the motor can sustain 9.2 Nm of continuous torque at standstill without exceeding normal thermal limits. The centering pilot measures 110 mm, providing a stable fit against gearbox or flange surfaces and helping preserve alignment during operation. Position data is returned through digital servo feedback, so the drive can correct speed and position errors during changing load conditions. A shaft machined with a keyway transmits torque directly to couplings, and the shaft seal helps keep lubricant and contaminants away from the bearing area. Standard rotor and fan balancing also help maintain smooth running at higher operating speeds.

Factory-supplied standard balancing keeps dynamic runout low during rotation. Power and feedback leads exit through the left-side connection and terminate in a sealed connector interface, which supports orderly cable routing at the motor housing. The motor is supplied without a blocking brake, so any static holding function must come from the drive or an external device when the axis is stopped. A keyed shaft end on side A keeps the mechanical output arrangement simple, and the standard housing with a shaft seal supports use in typical industrial installations. These features suit applications that prioritize compact packaging, steady tracking performance, and straightforward mechanical integration.