MDD093A-N-040-N2M-110GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-040-N2M-110GL0 is part of the MDD Synchronous Motors series and is a motor for digital drive controllers. It features a plain shaft with a shaft seal, 110 mm centering diameter, and delivers a continuous torque of 9.2 Nm at standstill. This model has an integrated multiturn absolute encoder and digital servo feedback with a nominal speed of 4000 RPM.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-040-N2M-110GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, this unit supplies commanded torque and speed to automated axes in packaging, assembly, and material-handling equipment. Its permanent-magnet design, combined with an internal position transducer, supports closed-loop motion that remains stable as mechanical load changes. Because the motor is intended for digital control, the feedback device and magnetic rotor work together so the drive can regulate speed smoothly across changing operating conditions.
At standstill, the rotor can maintain a continuous torque of 9.2 Nm, allowing holding or slow-feed operation without overheating. During normal operation, the motor reaches a nominal speed of 4000 rpm, which suits high-speed indexing duties. A centering pilot of 110 mm helps align the motor concentrically with matching gearboxes or mounting flanges. Position data is returned through digital servo feedback, and the motor uses a plain shaft so couplings can be fitted without keyways. Electrical and feedback conductors exit on the left side of the housing, and the integrated multiturn absolute encoder reports both revolution count and fine angular position for precise control.
The motor uses a standard balancing grade to limit residual vibration, and the housing relies on surface convection for cooling. The size code 093 identifies the frame cross-section, while connector-style power and feedback plugs help keep the installation compact. An axial lip shaft seal helps block lubricant ingress along the journal, and the unit is supplied without a blocking brake for applications that use external locking or drive-applied holding torque. The A length code keeps the motor body short, and only the A-side shaft journal is exposed while the B side remains closed in the standard shaft-end arrangement. This layout leaves the non-drive end enclosed and reduces the number of exposed rotating surfaces around adjacent machine parts.
Frequently Asked Questions about MDD093A-N-040-N2M-110GL0:
Q: What type of encoder is used in the MDD093A-N-040-N2M-110GL0 motor?
A: This model features an integrated multiturn absolute encoder for precise position tracking.
Q: What is the continuous torque at standstill for the MDD093A-N-040-N2M-110GL0?
A: The continuous torque at standstill is specified at 9.2 Nm for this synchronous motor.
Q: What type of shaft and seal does the MDD093A-N-040-N2M-110GL0 provide?
A: This motor is equipped with a plain shaft and includes a shaft seal for added protection.
Q: How is the electrical connection configured on the MDD093A-N-040-N2M-110GL0?
A: The connection for this motor is located on the left and uses a connector type connection.
Q: Does the MDD093A-N-040-N2M-110GL0 motor come with a holding brake?
A: This model is manufactured without a holding brake.
