Product Description:

The MDD093A-N-040-N2M-110GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into mechanical rotation for axis tasks in automated machinery. The design incorporates an integrated multi-turn absolute encoder so position data remains valid after power loss, assisting coordinated motion sequences on packaging, printing, or handling lines. This feedback arrangement allows the controller to retain axis position information after shutdown and restart. Because the encoder is integrated, no separate external position transducer is required at the motor for normal closed-loop operation.

At its rated operating point, the motor delivers a continuous standstill torque of 9.2 Nm, so it can hold load while energized without movement. Under transient conditions, the blocking brake can lock the shaft, and its stopping capacity is 11 Nm. Speed regulation extends up to 4000 rpm, allowing the drive controller to support high-throughput cycle requirements. Position and velocity feedback are transmitted through Digital servo feedback (DSF), and the centering seat diameter of 110 mm helps align the motor with the driven machine. Size code 093 and length code A set the frame envelope, and power and feedback lines connect through a single motor connector on the housing.

Power and feedback terminations are routed on Side A, which can simplify cable runs when adjacent components share the same orientation. The motor has a plain shaft and a shaft seal, supporting direct coupling to gearboxes or pulleys while helping limit contamination at the shaft exit. Rotor and adapter parts use standard balancing to reduce vibration at full speed. A standard housing encloses the stator windings, and the shaft is provided only on the drive side, without a second shaft on side B. This single-ended arrangement helps conserve space in compact machine frames.