Product Description:

The MDD093A-N-040-N2L-130PL2 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated electrical output from a compatible drive into mechanical rotation for automated axes in packaging, printing, and material-handling equipment. The design uses an A-length housing and standard balancing, which helps support stable operation during high-speed duty while keeping the motor compact enough for general machine layouts.

It generates a continuous standstill torque of 9.2 Nm, allowing the axis to hold load without motion while remaining thermally stable. When commanded to rated velocity, it reaches 4000 rpm, so connected machinery can run at high speed without requiring gear multiplication in every application. The centering pilot on the mounting face measures 130 mm, which helps the motor seat accurately against mating flanges or gearbox faces. All power and feedback lines exit on the left side through a single connector, which simplifies cable routing where clearance is limited. The housing uses the standard sealed version, and a shaft seal is fitted to keep lubricant and contamination separated during operation.

A blocking brake delivers 22 Nm of static holding torque, helping prevent vertical or suspended loads from drifting when power is removed. Torque is transmitted through a keyway shaft on side A only, and the lack of a second shaft end shortens the motor body at the opposite side. The rotor diameter corresponds to motor size 093, which places the unit in a medium frame for this motor family. Position data is returned through digital servo feedback (DSF), allowing the drive to close velocity and position loops without an external encoder package. This feedback arrangement supports accurate motion control while keeping the motor assembly self-contained.