Product Description:

The MDD093A-N-040-N2L-130PL0 synchronous servo motor is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. This model functions as a rotary actuator in digital drive systems, converting commanded current into mechanical motion for automated positioning and velocity control on machinery lines. It is intended for closed-loop axis applications where steady torque response and repeatable motion are required during normal machine operation.

The stator flange provides a centering surface of 130 mm, creating the locating fit against the machine frame. The housing follows the standard enclosure style and relies on ambient airflow rather than forced cooling, which keeps the overall installation simple. At rated excitation, the motor can furnish a continuous standstill torque of 9.2 Nm, allowing it to hold load while the shaft remains stationary. Dynamic operation reaches a nominal speed of 4000 rpm, which suits fast indexing and similar high-speed motion tasks. Power and feedback conductors exit on the left through a single connector, which helps establish a consistent cable routing path. Rotor signals are returned through digital servo feedback, and this feedback system supplies position data to the drive for closed-loop regulation. The compact A length code and 093 frame size keep the motor relatively compact while maintaining the rigidity needed for accurate motion.

The rotor uses a Standard balancing grade, so vibration remains low across the operating speed range. Motion is transmitted through a keyway shaft, and the front end is fitted with a shaft seal to help limit contamination near the bearing seat. The shaft end is supplied in a standard single-ended form, which supports straightforward coupling alignment with connected machinery. The motor is provided without a blocking brake, so any passive holding function must be handled by external clamping or by maintaining drive torque during standby.