Product Description:

The MDD093A-N-040-N2L-130GL2 is a synchronous motor from the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. As a motor for digital drive controllers, it supplies rotary motion to axes that need closed-loop positioning in automated machinery such as packaging stations and material-handling gantries. Its integrated feedback and mechanical layout allow it to fit directly into multi-axis assemblies without additional adaptation hardware. This arrangement supports coordinated motion where the drive must regulate torque, speed, and position with stable response during repeated machine cycles.

The motor delivers a continuous standstill torque of 9.2 Nm, giving the axis a clear static load capability at zero speed. Its nominal speed is 4000 rpm, while the 130 mm centering diameter aligns the flange accurately to housings or gearboxes. Position data are returned through digital servo feedback, which supports high-resolution commutation and removes the need for a separate external encoder. Power and signal leads exit on the left side, which can simplify cable routing when several motors are installed next to each other. Connection is made through a sealed industrial connector, keeping the electrical interface compact and protected inside the machine.

A blocking brake is included, and it can hold up to 22 Nm when the axis is de-energized to help prevent back-driving on vertical or overhanging loads. The rotor uses a plain shaft with a factory-installed shaft seal that helps limit lubricant migration into the motor interior. Only the drive end is provided, so there is no side-B shaft extension and the overall motor length stays shorter. The design follows length code A, which keeps the stack compact for installations where rear clearance is limited. The shorter housing can also leave more room for nearby couplings, guarding, or adjacent machine components.