Product Description:

The MDD093A-N-040-N2L-130GL0 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into rotary motion for position-controlled and speed-controlled axes in automated equipment. Its electromechanical output supports closed-loop motion in transfer systems, handling units, and other automated stations. The motor uses the size 093 platform with a standard housing form, which gives it a compact profile for modular machine layouts.

A centering diameter of 130 mm aligns the flange on the machine interface for accurate mounting. At standstill, the motor can deliver 9.2 Nm of continuous torque, which supports holding and low-speed feed duties. The nominal speed is 4000 rpm, giving the paired drive a high base speed for dynamic axis movement. The rotor is balanced to the standard grade, which helps keep vibration within normal operating limits. All electrical terminations leave from the left side of the housing, and this orientation is designated Left in the type code. A plug-style connector provides the power and signal interface and helps keep cable routing orderly.

Motion feedback is provided by digital servo feedback (DSF), allowing the drive to receive high-resolution position data through the hybrid cable. The motor uses a plain shaft, so torque is transferred through a suitable hub or coupling at the machine connection. There is no side-B shaft extension, and a factory-installed shaft seal protects the bearing area from ingress. The unit is supplied without a blocking brake, so any holding function must come from the drive or an external device. The length designation is code A, which indicates the shortest body in the 093 frame and helps keep inertia low.