Product Description:

The MDD093A-N-040-N2L-130GB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit converts commanded current into precise rotary motion for axis positioning, speed regulation, and repetitive cycling in automated production cells, packaging lines, and material-handling stations. Its construction supports closed-loop control and rapid reversals, making it suitable for high-throughput machinery that requires consistent motion accuracy during continuous operation.

The motor has a centering diameter of 130 mm, which allows direct seating in standard machine frames. Power and feedback cabling exits on Side B through a sealed connector, which helps simplify cable routing when the drive is mounted opposite the working axis. Under continuous stall conditions, the stator can deliver 9.2 Nm of torque without exceeding thermal limits. In dynamic operation, the motor reaches a nominal speed of 4000 rpm, helping keep index times short. A standard cast housing provides thermal mass and surface area for natural convection, and the rotor is balanced to the standard class to reduce vibration during operation.

Position holding during power loss is provided by a blocking brake with 11 Nm of static torque, which is useful for axes with vertical or suspended loads when the drive is disabled. Motion feedback is supplied by integrated Digital servo feedback (DSF), allowing the controller to monitor motor position for accurate speed and position control. The drive end uses a plain shaft, and it is protected by a shaft seal to help keep contaminants away from the bearings. The opposite side remains closed because this model does not include a shaft end on side B. Its compact A length reduces overhang, and the motor is intended for operation with digital drive controllers.