Product Description:

The MDD093A-N-040-N2L-130GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into regulated rotary motion for positioning axes in automated machinery. It is suitable for servo axes that need repeatable motion under closed-loop control. The unit uses an A-length housing, giving a compact profile for medium power ranges in packaging, printing, and handling equipment where rapid speed changes are required.

A centering diameter of 130 mm aligns the motor face to a gearbox or machine plate. The rotor is factory balanced to the standard grade, which helps limit vibration during operation. This supports smoother running at higher speeds and reduces unwanted movement at the coupling interface. Electrical terminations are routed on Side B, and the power-feedback bundle is attached through a single connector to simplify cabinet wiring. During continuous stall conditions, the motor can deliver 9.2 Nm of torque without exceeding thermal limits. When driven at rated frequency, it reaches 4000 rpm for applications that demand high throughput with moderate torque density.

Control accuracy is supported by digital servo feedback, which supplies high-resolution position data to the drive for tight loop correction. The unit is supplied without a blocking brake, so external clamping devices or motor torque must hold loads when power is removed. A protective shaft seal guards the smooth, non-keyed shaft against dust and coolant ingress, and the plain shaft design is suited for clamp couplings. The standard housing and shaft-end configuration omit a secondary shaft on the non-drive side, which helps reduce overall depth in installations with limited rear clearance.