MDD093A-N-040-N2L-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-040-N2L-130GA2 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It has a nominal speed of 4000 revolutions per minute and a continuous torque at standstill of 9.2 Nm. This motor features a plain shaft with a shaft seal, a 130 mm centering diameter, and includes a holding brake with a torque of 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-040-N2L-130GA2 is a permanent-magnet AC servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it receives high-resolution current commands and delivers proportional mechanical power to motion axes in automated assembly cells, packaging stations, and material-handling gantries. Its electromagnetic design supports rapid acceleration and deceleration while maintaining the position accuracy required in closed-loop industrial automation. The motor is suited to servo axes that need responsive speed changes and repeatable motion under varying load conditions.
A standard dynamic balance grade limits vibration, and the stator flange features a centering diameter of 130 mm to align the motor precisely on the machine frame. Rated operation reaches a nominal speed of 4000 rpm, enabling fast cycle times when paired with a compatible drive. At standstill, the winding can supply a continuous torque of 9.2 Nm, allowing the motor to support sustained load without overheating during rated operation. Power and feedback cables exit on Side A through a sealed connector that keeps the housing within its IP protection envelope. This cable arrangement keeps the connection area grouped at one end of the housing. The shaft area is protected by an integral lip seal, and the motor has the normal shaft end only on side A. Length code A indicates the shortest stack within the 093 frame, which helps reduce installation depth.
An integrated blocking brake applies up to 22 Nm of static torque to secure vertical loads when power is removed. Position data is returned through digital servo feedback (DSF) so the controller can re-establish rotor position after each startup. This feedback arrangement supports electronic commutation and continuous position monitoring during operation. The motor uses a plain shaft for couplings that rely on frictional clamping rather than keys, and the frame designation 093 keeps it within the standard mechanical envelope of the series.
Frequently Asked Questions about MDD093A-N-040-N2L-130GA2:
Q: Which series does the MDD093A-N-040-N2L-130GA2 motor belong to?
A: The Bosch Rexroth Indramat MDD093A-N-040-N2L-130GA2 belongs to the MDD Synchronous Motors series.
Q: What is the continuous torque at standstill for the MDD093A-N-040-N2L-130GA2 motor?
A: This model features a continuous torque at standstill rating of 9.2 Nm.
Q: Does the MDD093A-N-040-N2L-130GA2 motor include a holding brake?
A: The MDD093A-N-040-N2L-130GA2 is equipped with a blocking brake providing a holding brake torque of 22 Nm.
Q: What type of motor feedback does the MDD093A-N-040-N2L-130GA2 support?
A: A digital servo feedback (DSF) system is used for motor feedback in this model.
Q: What type of shaft and shaft seal does the MDD093A-N-040-N2L-130GA2 motor have?
A: This motor features a plain shaft with a shaft seal for its shaft configuration.
