Product Description:

The MDD093A-N-040-N2L-110PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies closed-loop rotary motion to positioning axes and automated tooling that require precise velocity regulation and rapid acceleration. In industrial automation, it converts drive commands into controlled torque so that machine cycles remain repeatable and synchronized with upstream logic. This arrangement suits feed axes, indexing tables, and similar machine functions that depend on accurate response during frequent starts and stops.

A continuous standstill torque of 9.2 Nm provides stable holding force without overheating, while the integrated blocking brake can deliver up to 22 Nm to secure vertical loads when power is removed. Under rated excitation, the rotor reaches 4000 rpm, a speed that suits many mid-range production spindles and positioning systems. The centering pilot measures 110 mm in diameter, helping the motor seat accurately on the machine interface. A shaft with a keyway transfers torque through keyed couplings, and a shaft seal helps limit lubricant ingress. The housing uses the standard design, the shaft end is provided only on side A, and the compact A motor length keeps the installation short.

The electrical connection is oriented to the Right and uses a Connector, which helps simplify cable routing inside tight machine frames. Position and velocity data are returned to the drive through Digital servo feedback (DSF), allowing high-resolution control loops without an external encoder. The motor has size 093, placing it in the corresponding frame group for compatible drive systems. This feedback arrangement supports precise speed regulation and stable position control during repeated motion cycles.