Product Description:

The MDD093A-N-040-N2L-110PR1 servo motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is used with digital drive controllers, so it couples directly to an inverter to provide closed-loop rotary motion for automated tooling. The motor uses the 093 frame size and a standard housing that matches the mounting geometry used across this series. Its synchronous design supports precise speed and position control in pick-and-place modules, packaging equipment, feed systems, and material-handling axes that require repeatable motion.

The motor reaches a nominal speed of 4000 rpm, allowing fast cycle times while staying synchronized with the drive output. At standstill, it can supply a continuous torque of 9.2 Nm, so it can hold a constant load at zero speed without overheating during continuous operation. Position and velocity data are returned through Digital servo feedback (DSF), allowing the controller to close the loop with high resolution. The motor uses length code A, which gives it the shortest active length in this family, and a centering diameter of 110 mm helps align the flange accurately on mounting faces. The stator and rotor are balanced to the standard grade for stable running during normal machine operation.

Electrical power and feedback conductors exit on the right side through a sealed connector, which can simplify cable routing when the cabinet or cable path is positioned on that side of the motor. An integrated blocking brake applies 11 Nm of holding torque to keep the load stationary during power-off conditions. The shaft uses a keyway for positive mechanical coupling, and a shaft seal helps limit dust or fluid ingress at the bearing seat. The motor also uses a connector interface that keeps the connection area compact, and the shaft end is provided only on side A to reduce overall length.